Product
Accumulation Tanks - Producer
BAEST, Machines & Structures, a.s. offers Accumulation Tanks (Producer).
Storage tanks are used for “storing” the excess water within the heating systems of cogeneration units. These tanks are single shelled, pressure (PN6, PN10, PN16) containers made of structural steel, rarely of stainless steel, with the capacity ranging from 2 up to 250 m3. They store heat (usually as hot water with temperature 50-100°C) from an outer source until its further usage. The tank is fitted with three or four mounting legs, with necks for input and output of the heating medium, with internal distribution ratification sleeves, with lugs for measurement, regulation, drainage and ventilation and with thermal insulation. Accumulation tanks optimize the operation of cogeneration units and the equal heat supply for the system.
Company BAEST Machines & Structures, Inc. offers its customers both standard solutions and atypical types of tanks. The company shall propose an optimal solution according to customer assigned tasks including a structural analysis, and further ensures the manufacture, transport and installation at the destination. Catalogue of storage tanks shall be sent upon request.
Accumulation Tanks - Producer: Supply of an Accumulation tank includes:
- calculation of structural analysis
- processing of engineering documentation
- approval and acceptance by TÜV
- surface treatment: inside natural, outside 1x40μ of undercoat
- external thermal insulation
- sheathing - galvanized sheet
- transport to destination
- Pressure, single-shell, cylindrical, vertical tank with domed foreheads
- Tank material P265GH, legs and brackets material - S235JR
- Medium - water, steam
- Operating pressure standards: PN 6, PN 10, PN 16
http://www.baest.cz/en
Price of the Product
Category of the Product
Company website
4
products -
BAEST Machines & Structures, a.s.
Our recommended products and services
-
-
Design and manufacture of reception or discharge tanks with steel or stainless steel and also tanks made to measure for each client, with steel, stainless steel and polyester depending on the liquid to be stored
-
Design and manufacture of reception or discharge tanks with steel or stainless steel and also tanks made to measure for each client, with steel, stainless steel and polyester depending on the liquid to be stored
-
DÉCAPAFOND® Gel is a high-performance acid-based pickling solution specially designed for the chemical treatment of stainless steel and aluminium. Formulated for spray application, it ensures even pickling on tanks, welded assemblies, and hard-to-reach areas, while reducing nitrous gas emissions by up to 80%. Its gel texture adheres perfectly to vertical surfaces, allowing clean, drip-free application. DÉCAPAFOND® is ideal for cleaning weld seams, complex parts, and internal surfaces of stainless steel equipment in the food, pharmaceutical, chemical, and industrial sectors. It is easily applied using a suitable sprayer and rinsed thoroughly with cold water under high pressure. ✅ Coverage: 4 to 6 m⊃2;/kg ✅ Action time: minimum 50 minutes ✅ Packaging: 20 kg, 200 kg, 1200 kg ✅ Nitrous gas emission reduction: up to -80% ✅ REACH compliant – contains hydrofluoric acid (<5%) and nitric acid (<30%) ⚠️ Usage Recommendations and Safety Precautions For professional use only Do not use on incompatible surfaces without prior testing On brushed or polished stainless steel, the product will alter the finish – mechanical or electrochemical pickling is recommended in these cases After pickling, perform decontamination and passivation to restore the protective passive layer Store in a cool, ventilated area away from heat sources 🔬 Quality Control and Effectiveness After the action time and rinsing, check the residual pH using indicator paper. A pH above 6 confirms proper rinsing and complete removal of acid residues. This prevents residual corrosion and prepares the surface for passivation or further treatment. 🛒 Available on our e-commerce site: https://decapant-pro.com
-
